Select Purewater 300

Glassware washing supply

The Select Purewater 300 is designed specifically for use with laboratory glassware washing machines, providing rinse water to a purity of over 1MΩ.cm at a flow rate of up to 48 litres per hour. It can be fitted with an on-demand pure water boost pump to provide up to 1.5 bar pressurised feed with a flow rate of up to 200 litres per hour.

Kirjeldus

Guaranteed > 1MΩ.cm water quality
Production rate up to 48 litres per hour
On-demand pure water boost pump for pressurised output
Additional high flow gravity outlet
WiFi connection.

Treated Water Specification
Inorganics	> 1MΩ.cm
pH¹	Neutral
Bacteria	> 99% rejection2
Organics – TOC (ppb)	< 50
Particles	–
Endotoxins	–
DNases	–
RNases	–
Dispense modes	Latched – hold – volumetric
Dispense flow rate	up to 200 l/hour @ 1.5 bar

¹ pH of stored water may decrease due to absorption of free carbon dioxide

² When measured directly across the membrane

Installation requirements
Power	Single Phase, 110-230V, +/- 10%, 50/60 Hz
Feed water	Potable
Maximum TDS (ppm)	1000
Minimum inlet pressure – psi (bar)	30 (2.1)
Maximum inlet pressure – psi (bar)	90 (6.2)
Feed water temperature	1-35oC
Product outputs*
@ 10oC (l/hr)	30
@ 25oC (l/hr)	48

* Product outputs based on a feed water pressure of 4 bar

Select Purewater 300 Datasheet