Kirjeldus
To provide higher grades of purified water the basic Integra L units can be supplemented by the addition of optional polishing packs comprising of stand-alone exchangeable cylinders. For applications requiring high quality water with enhanced bacterial specification, UV disinfection and 0.2μm filtration is available in an optional BIO pack.
- Single compact unit which purifies, stores and distributes lab water
- Produces up to 600 l/hr
- Provides ASTM Type I, II or III water and BS EN ISO grade 1,2 or 3 water
- Utilises reverse osmosis technology, in conjunction with activated carbon and particulate filtration as part of the first stage of purification
- Integrated data logging for performance traceability equipped as standard
- Delivered factory tested for ease of installation
- LCD touch screen display for ease of operation
| Treated Water Specification | |
| Conductivity | < 30μs/cm* |
| Bacteria | > 99% rejection** |
| Organics – TOC (ppb) | < 50*** |
| Particles | 0.2μm** |
| Endotoxins | 0.25EU/ml** |
* For enhanced inorganic and organic quality the unit can be fitted with either 10,15 or 18MΩ.cm polishing deionisers packs.
** Optional ‘BioPack’ will provide purified water with a total viable count of <1cfu/ml, endotoxin level <0.25EU/ml and particles <0.2μm
*** Typical level, depends on feedwater
| Installation Requirements | |
| Power | Single Phase, 230V, +/- 10%, 50 Hz |
| Feedwater | Potable* |
| Maximum TDS (ppm) | 1000 |
| Minimum inlet pressure – psi (bar) | 15 (1) |
| Maximum inlet pressure – psi (bar) | 90 (6.2) |
| Feedwater temperature | 1-35oC |
| Flowrate | – |
| Free chlorine | Must be dechlorinated |
* Softened feed water required for 600 l/hr (Integra LS). Integra LH can operate on hard water up to 400ppm as CaCO3
